HOLZMANN MASCHINEN HBS 700 Manual De Instrucciones página 36

Then tilts the table to 30°, place 1 M89x30 Allen screw (G).
Tighten it.
13.2.5 Fitting the fence rail
To fit the fence rail (J), firstly check 4 winged screws and
washers (I) supplied into the 4 threaded holes on the
bottom of the table.
Push the fence rail forwards against the front edge of the
main table
Fully tighten the winged screws to secure.
13.3 Conntecting to the dust collector
The machine may only be operated in conection with a dust collector!
The dust collector for chips and dust to be taken simultaneously with the motor of the machine.
You can choose one of the two plugs between.
It would be best when you connect the machine with both plugs to the dust collector.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
HOLZBANDSÄGE / MWOOD BAND SAW / SIERRA DE CINTA / SCIE À RUBAN
ASSEMBLY
Seite 36
HBS 700 – HBS 800