Denon DRW-660 Instrucciones De Operación página 8

ENGLISH
PLAYBACK
e The operations described below apply to deck A and deck B alike.
Switch on your amplifier or receiver.
e Set the Tape Monitor switch on your amplifier or receiver to the TAPE
position.
@ The numbers in the illustration below depict the order in which
operation steps are carried out.
@ Press the POWER switch @ to the ON ( = ) position.
@ Press the EJECT ( & ) button @ to open the cassette compartment cover
@.
© Load the cassette tape and close the cassette compartment cover @.
@ When listening to a tape that has been recorded with Dolby noise
reduction, set the DOLBY NR button @ to match the system used at the
time of recording.
Pressing the DOLBY NR button @ seiects Dolby noise reduction type B
(and the indicator lights up).
One more press of the DOLBY NR button @ selects Dolby noise
reduction type C {and the [C] indicator lights up).
Pressing the DOLBY NR button @ once again switches Dolby noise
reduction off.
Dolby NR off Dolby NR dose re
Dolby NR type C
© Press the Direction (4 >) button @ to select the direction of tape
transport.
fone
[reene
Wi RELAY PLAY (continuous playback of the tapes in deck A and deck B)
e Load a cassette tape into deck A and B, and set the Dolby NR button
correctly.
@ REVERSE MODE set to "RELAY" @.
@ Press the PLAY button ® of the deck you first wish to listen to.
The PLAY indicator of the deck playing back the tape will light up.
@ To stop relay play, press the stop (MM) button ® of the deck currently
playing the tape.
e Relay play will play decks A and B in succession for 5 cycles, upon
which playback stops. When playback starts from deck B, when
switching to deck A, the first deck A playback cycle will be counted
as the second cycle. The completion of 5 cycles will always be at the
opposite side of the tape in deck B.
i MUSIC SEARCH SYSTEM
The music search system detects blank sections (lasting for at least 4
seconds) between selections in order to locate the beginning of selections
in the forward or reverse direction.
1. To advance from the current selection to the beginning of the next
selection (CUE):
Press the PLAY button simultaneously with the Fast Forward ( PP )
button when the tape is travelling in the forward {>} direction. Press
the PLAY button simultaneously with the Rewind ( €@ } button when
the tape is travelling in the reverse (<1) direction.
The deck will skip the rest of the current selection and automatically
resume play from the beginning of the next selection.
2. To repeat playback from the beginning of the current selection:
Press the PLAY button simultaneously with the Rewind ( €4@ } button
when the tape is travelling in the forward (>) direction. Press the PLAY
button simultaneously with the Fast Forward { PP ) button when the
tape is travelling in the reverse (<j) direction.
The deck will rewind the tape to the beginning of the current selection
and automatically resume play from that point.
This is very convenient for repeating playback of the current selection.
© Select the type of tape transport with the REVERSE MODE button @.
Indicator
—
To listen to repeat playback
of both sides oe)
To listen to continuous pla
back of both sides and both decks. RELAY
@ Press the PLAY button ® to begin playback. The PLAY (<4 or >)
indicator wilt light during playback.
Press the stop (ME) button @ to stop the playback.
e In the continuous playback mode (REVERSE MODE set to CZ) ),
playback of both tape sides will be repeated 5 times and then stop
automatically.
e If different types of Dolby noise reduction are used for record and
playback, playback response will be adversely effected.
e When power is turned off during tape transport, it may not be
possible to remove the cassette by pressing the EJECT ( & ) button.
In this case, turn on power again before you press the EJECT ( #)
button.
To listen to one side only
Notes on Music Search Operation: .
The search functions operates by detecting comparatively long, blank
sections approximately 4 to 5 seconds long, in between recorded
selections. Therefore, the system may not operate normally in the
following cases:
Recordings with discontinuous speech or conversation.
Recordings with long periods of pianissimo (softly played music).
Recordings with Jong silences.
Blank sections with a high fevel of noise.
Blank sections shorter than 4 seconds.
If noise-emitting appliances, such as electric razors, drills, refrigerators,
etc., are operated nearby.
© REV close to the beginning of the program
or CUE close to the ending.