Publicidad
5. HOW TO ASSEMBLE
IMPORTANT
Make sure the machine is
unplugged from the electrical
outlet before assembly.
1
Slide the TWIN GEAR HOUSING onto the
MAIN BODY and push it all the way back
toward the MAIN BODY until it fits snugly
in place.
3
10
2
IMPORTANT: Align the locating dots so that the single dot on the FREE WHEEL GEAR is
in between the two dots on the DRIVE GEAR. These dots are located on the end surface
of each GEAR. Holding the GEARS with the locating dots aligned, slide them into the
TWIN GEAR HOUSING with the steel end first, so that the FREE WHEEL GEAR enters the
right slot and the DRIVE GEAR enters the left slot.
Push back the GEARS they come to a stop. You may need
to rotate the GEARS while pushing them in until they slide in
completely and lock into place. Look down the into FEEDING
CHUTE to confirm that the GEARS are seated properly.
NOTE: When seated properly, you will NOT be able to
see any portion of the DRIVE SHAFT. If you see any
portion of the DRIVE SHAFT, keep rotating the gears
while pushing them in to lock them into place.
Publicidad
