Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
Dispenser 2
You can change the settings for the dispenser .
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Dispenser 2, and then tap OK.
3. Turn the Navigation dial to select Detergent type, Concentration, or Amount, and then tap OK.
-
Detergent type: You can select the type of detergent you want to use in the dispenser .
-
Concentration: You can change the concentration level.
-
Amount: You can select the amount of the detergent to be dispensed during each wash cycle.
4. Turn the Navigation dial to select the desired setting, and then tap OK.
Pump Clean
You can use this function to clean detergent or softener residue buildup in the pump. Use this function
after you empty and clean the dispenser.
1. Fill the water in the dispenser(s) up to the MAX line.
2. Tap WASHER, and then tap Options.
3. Turn the Navigation dial to select Pump Clean, and then tap OK.
4. Tap OK to select the desired dispenser pump(s) you want to clean.
-
You can select from Dispenser 1, Dispenser 2, or Dispenser 1/2.
5. Tap OK to start cleaning.
-
The water will drain out from the dispenser(s).
NOTE
To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK.
Child Lock
To prevent children or infants from accidentally starting or setting the washer, Child Lock locks all buttons
except for
and Options.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Child Lock, and then tap OK.
3. Tap OK to select On or Off.
NOTE
• When Child Lock is on, all buttons are disabled except for
• Tapping a button while Child Lock is on triggers an alarm with the "Child Lock On" message.
• You cannot open the door after a wash cycle when the Child Lock is on. Turn the function off before
opening the door to take out the laundry.
70
English
Untitled-2 70
and Options. The washer door also locks.
2023-11-09
4:27:02
Publicidad
