Publicidad
Idiomas disponibles
Idiomas disponibles
Special features
Smart Control (Smart Monitor for gas dryer models only)
You can connect to the SmartThings app and control your Laundry Hub remotely.
Connecting your Laundry Hub
1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2. Tap
to turn on the Laundry Hub.
3. Touch and hold
.
a. The Laundry Hub enters AP mode and connects to your smartphone or tablet.
b. Tap
to authenticate your Laundry Hub.
c. Once the authentication process is complete, your Laundry Hub is successfully connected to the app.
-
You can use various features available in the SmartThings app.
NOTE
• If your Laundry Hub fails to connect with the SmartThings app, try again.
• Check your router if you experience any Internet connection problem after connecting your Laundry Hub
with the SmartThings app.
• If the Wi-Fi is off, tap Options, and then select Wi-Fi to turn it on.
• Turning the Laundry Hub's Wi-Fi on allows you connect to the Laundry Hub via SmartThings app on your
smartphone or tablet, regardless of the power status of the Laundry Hub. However, the Laundry Hub
appears offline on the SmartThings app if the Laundry Hub's Wi-Fi is off.
• Close the door before starting the Smart Control function.
• If you use your Laundry Hub for a while without connecting it to the SmartThings app, a pop-up message
about Smart Control will show for 3 seconds.
• If the Laundry Hub's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn
of the power.
Stay Connect
Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a
cycle. Your Laundry Hub stays connected to the app so you can send additional instructions, whether you
are at home or away.
1. If you turn on the Stay Connect function on the SmartThings app, the Laundry Hub will stay in standby
power saving mode after completing a cycle.
-
The Stay Connect function will remain active for up to 24 days if the door remains closed.
2. When the Stay Connect function is active, the Smart Control, Door Lock, and Wi-Fi icons are illuminated
on your Laundry Hub display.
3. You can conveniently control your Laundry Hub, adding spin, soil cycles using the SmartThings app.
NOTE
• The Laundry Hub switches to standby power saving mode when operation is paused even if the Laundry
Hub is not connected to the SmartThings app.
• In some circumstances, only the Door Lock icon may be illuminated.
Untitled-2 77
English 77
2023-11-09
4:27:03
Publicidad
