Hupfer WHP Serie Instrucciones De Servicio página 40

Operating instructions
7 "Reduce temperature" button
8 "Increase temperature" button
*If an optional heated lamp gantry is connected
The on/off button is used to switch the device on/off.
The display shows the current temperature. When the temperature is
set, the display shows the required temperature.
The required temperature is set using the controls on the displays.
If the hot plate is used together with a permanently installed gantry
lamp module, the gantry lamp module can be connected and operated
via the controls. In this case, the controls can also be installed in the
gantry lamp modules.
6.2 Operating the transport cart
The hot plate is operated via the display built into the same structure.
If the hot plate is installed together with a gantry lamp module, the
gantry lamp module is also operated via the display and supports the
function of the hot plate.
Fig. 5: Controls and display for hot plate
Switching the hot plate on
Press and hold the on/off button
�� The display shows "ON".
Switching off the hot plate
Press and hold the on/off button
�� The display goes out.
Switching on the heating function
Press the "Switch mode" button
�� The "Heating mode" display lights up.
�� The display shows the current temperature.
Hot plate
.
.
.
15 / 23