Safety Information; During Use - KPS MT20L Manual De Funcionamiento

Multímetro buscapolos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KPS-MT20L • Non-contact voltage detector
1.

SAFETY INFORMATION

¡WARNING! BE EXTREMELY CAREFUL IN THE USE OF THIS METER
Improper use of this device can result in electric shock or destroy of the
meter. Follow all safeguards suggested in this manual and the normal safety
precautions used in working with electrical circuits. Do not service this de-
vice if you are not qualified to do so. To ensure safe operation, and in order
to exploit to the full the functionality of the meter, please follow the directions
in this section carefully.
This meter has been designed according to IEC-1010 concerning electronic
measuring instruments with an overvoltage category CAT II 600V and pollution
2. Follow all safety and operating instructions to ensure that the meter is used
safely and is kept in good operating condition. With proper use and care, the
digital meter will give you years of satisfactory service.
1.1 Preliminary
• When using the meter, the user must observe all normal safety rules con-
cerning:
- Protection against the dangers of electrical current.
- Protection of the meter against misuse.
• When the meter is delivered, check that it has not been damaged in transit.
• When poor condition under harsh preservation or shipping conditions
caused, inspect and confirm this meter without delay.
• Before using to check for voltage, always test the meter on a known live
circuit to verify that the detect function of the meter is working properly.
• Test lead or test clip must be in good condition. Before using verify that the
insulation on test lead or test clip is not damaged and/or the leads wire is
not exposed.
• Full compliance with safety standards can be guaranteed only if used with
test leads supplied. If necessary, they must be replaced with the same mod-
el or same electric ratings.

1.2 During use

• Before using, you must select the right function and range.
• Never exceed the protection limit values indicated in specifications for each
range of measurement.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

602350006

Tabla de contenido