Safety Information; Symbol Explanation; Safety Precautions - KPS -PA40 Manual De Funcionamiento

1.

SAFETY INFORMATION

TheAC/DC clamp meter has been designed according to IEC1010-1 and
IEC1010-2-032 concerning safety requirements for electrical measuring instru-
ments and hand- held current clamps with an overvoltage category (CAT II)
and pollution 2.
The AC/DC clamp meter complies with the requirements of the following Euro-
pean Community Directives: 89/336/EEC(Eiectromagnetic Compatibility) and
73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE Marking}. However,
electrical noise or intense electromagnetic fields in the vicinity of the equipment
may disturb the measurement circuit.Measuring instruments will also respond
to unwanted signals that may be present within the measurement circuit. Users
should exercise care and take appropriate precautions to avoid misleading.
2.

SYMBOL EXPLANATION

Important safety information, refer to the operating manual
Dangerous voltage may be present
Ground
Double insulation (Protection class II).
AC - Alternating current
DC - Direct current
Battery
Conforms to European Union directives
3.

SAFETY PRECAUTIONS

Follow all safety and operating instructions to ensure maximum personal safe-
ty during the operation and to ensure the meter is used safely and is kept in
good operating condition.
• Read these operating instructions thoroughly and completely before operat-
ing your meter.Pay particular attention to WARNINGS, which will inform you
of potentially dangerous procedures.The instructions in these warnings must
KPS-PA40 • Digital clamp meter
16