Eureka NEN300EU Serie Guia Del Usuario página 10

TROUBLESHOOTING
In case of malfunction, please refer to the following table
Problem
The vacuum cleaner does
not switch on
The vacuum cleaner
won't pick up
Dust is escaping from the
vacuum cleaner
Accessories won' t pick
up dust/debris
The blockage indicator
(if applicable to model)
activates
If the problem still can't be solved, please contact local service center.
10
Solution
- Ensure the plug is firmly in the socket and switched on
- Depress the power switch on the unit
- If the unit has cut out during use, disconnect the unit from the wall socket, allow to cool
for one hour, clean the filters, empty bin and check the hose/accessories for blockages
- Seek expert help from a qualified electrician
- Check hose/tools are correctly attached to the machine/hose/tube
- Check the air paths of the hose/accessory are not obstructed by blockages
- Check dust bag and if necessary empty
- Frequently cleaning filters will maintain performance; see 'MAINTENANCE' section
- The filters/dust bag are not fitted correctly; See 'MAINTENANCE' sections
- If the filters are damaged these will need to be replaced
- The wrong tool is fitted for the task
- Check the air paths of the tools are not obstructed by blockages
- Frequently cleaning filters will maintain performance; check 'MAINTENANCE' section
- Check and empty the dust bag
- Check the air paths of the hose/tubes are not obstructed by blockages
- Frequently cleaning filters will maintain performance; check 'MAINTENANCE' section
- Check and empty dust bag
- Check the air paths of the accessories/hose/tubes are not obstructed by blockages