Cameo EVOS W7 IP Manual De Usuario página 18

Select with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN,
confirm with ENTER, return with MENU.
Setting the DMX start address
Selecting the DMX mode
Select reception options: 1. Backup by XLR = If
W-DMX is interrupted, XLR takes over (assuming
a wired connection is established). 2. Send to XLR
= Forward DMX signal via DMX OUT (XLR) 3. Wire-
less Only = Receive only via W-DMX, no backup,
no forwarding of the DMX signal.
Reset = Terminate the connection to all W-DMX
devices and put them on pairing standby.
OPERATION VIA ART-NET
Starting from the main screen, press MENU to enter the main menu. Use UP and DOWN to select
the Control menu and press ENTER. Now select the menu item Art-Net and confirm again. See
the table below for information on the sub-menu items in the Art-Net menu and the corresponding
setting options.
Select with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN,
confirm with ENTER, return with MENU.
Setting the
DMX start
address
Selecting
the DMX
mode
18