Cameo EVOS W7 IP Manual De Usuario página 24

Select with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN,
confirm with ENTER, return with MENU.
Setting the DMX start addresses Main and
Pixel
Selecting the control signal for Pixel Control
Main Address with Master Dimmer (Yes) or
without Master Dimmer (No)
RGB or RGBW Pixel Control
Network settings:
IP address: set 1st block, confirm, set 2nd
block, confirm...
Subnet mask: set 1st block, confirm, set 2nd
block, confirm...
Select universe and universe group
DMX control via XLR cable (XLR Only) or
W-DMX (Wireless Only). If "XLR First" is se-
lected, W-DMX serves as backup; if "Wireless
First" is selected, control via XLR cable serves
as backup.
Reset = Terminate the connection to all
W-DMX devices and put them on pairing
standby.
OPERATION VIA KLING-NET AND DMX
The operating mode Kling-Net+DMX offers the possibility of controlling the LEDs via Kling-Net and
the head movement separately via DMX. Selecting this mode automatically activates the 87-chan-
nel DMX mode. Starting from the main screen, press MENU to enter the main menu. Use UP and
DOWN to select the Control menu and press ENTER. Now select the menu item Kling-Net+DMX
and confirm again. Information on the sub-menu items in the Kling-Net+DMX menu and the
corresponding setting options can be found in the table below.
24