Cameo EVOS W7 IP Manual De Usuario página 26

STAND-ALONE OPERATION (Scenes)
Similar to a DMX control unit, the stand-alone operating mode Scenes makes it possible to set
pan, tilt, dimmer, RGBW, zoom, pan/tilt macros etc. directly on the device with values ranging from
000 to 255. A total of 8 individual scenes (Scene 1–8) can be created, edited, saved and recalled.
Starting from the main screen, press MENU to enter the main menu. Use UP and DOWN to select
the Control menu and press ENTER. Now select the menu item Scenes and confirm again. For
information on the sub-menu items in the Scenes menu and the corresponding setting options,
see the Scenes and Edit Scene tables below.
Select with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN,
confirm with ENTER, return with MENU.
Start scene
Record a scene from an external
controller
Edit scene (see table Edit Scene)
Output scene as a control signal to
a slave unit via XLR, Wireless or XLR
and Wireless
Output Scene as a control signal
(Stand Alone No) Do not output Scene
as a control signal (Stand Alone Yes)
26