Publicidad
Idiomas disponibles
Idiomas disponibles
Internal T-Coil Switch and Indicator LED
Power "On"
Green LED
Right Side View:
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
Note: For best performance when using the T-coil feature, the
Pocketalker must be in a vertical orientation. This ensures the
best magnetic coupling to the loop system. When the T-coil
switch on the Pocketalker is enabled, the Pocketalker disables
the microphone input.
Recharging NiMH Batteries
BATTERY RECHARGING KITS MODEL BAT
KT7:
SAFETY WARNINGS
1. To prevent injury, never charge batteries when the Pocketalker 2.0 is in
enclosed spaces such as handbags, cases, or other closed storage bags.
2. To prevent injury, unplug the charger during lightning storms, or
when charging is complete and the device is unused for 2 months or
more.
Lanyard Slot
3. To prevent injury, be advised that different AC operating voltages
require the use of different types of wall outlet adapters. Check
the line voltage in your area and use the correct prong type.
4. To prevent injury, use only the power supply provided by Williams
Sound. Other power supplies may have similar specifications,
but may not be equivalent. Use of an unapproved power supply
may present a safety hazard or leave the device partially or
completely inoperable, and may void the warranty.
5. Do not use the power supply or cords if they have been damaged
in any way.
6. Do not recharge the batteries for longer than 24 hours. After 24
hours, unplug the charger power supply from the wall outlet.
12
T-Coil Symbol
T-Coil "On" LED
T-Coil Switch
(in "On" position)
Charging LED
indicator
USB Micro-B
Charging Port
CAUTION
RISK OF ELECTRICAL SHOCK — DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR SIDES). NO USER-SERVICABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
A544
FOR CUSTOMERS IN THE UNITED STATES
This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to part 15 of the FCC rules.
RISK OF ELECTRICAL SHOCK — DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR SIDES). NO USER-SERVICABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
FOR CUSTOMERS IN CANADA
This Class B digital device meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
^ s f p
exigencies du Règlement sur le matériel brouilleur du Canada.
o
f
n
r
b
= a
`
q o f
b
n
= `
m ^ p = l
r
b
e
K = k
l
o
`
r
= b
s
b
o
i
=
f
b
!
RIQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE ÉLECTRIQUE, NE
RETIREZ PAS LE COUVERCLE (OU CÔTÉS). IL NE SE TROUVE AL'INTÉRIEUR
AUCUNE PIECE POUVANT ETRE RÉPARÉE PAR L'USAGER. S'A DRESSER A
UN RÉPARATEUR COMPÉTENT.
Charging Instructions
The Pocketalker can recharge NiMH batteries when used with an
optional BAT KT7 (International) charging kit.
1. Verify or change battery switch (located in the battery
compartment) to the NiMH position.
2. Verify or insert NiMH batteries into battery compartment.
Observe battery polarity when inserting the batteries.
3. Using the included USB A to USB Micro-B cable, plug
the USB Micro-B end into the USB Micro-B charging port
on the Pocketalker. Plug the USB A end into the USB A
port on the power supply included with the charging kit.
Plug the power supply into a wall outlet.
4. The charging indicator will blink slow while charging, and
then will stay on solid when the unit is charged.
WARNING!
CAUTION
!
AVIS
!
RIQUE DE C
ATTENTION: POUR RÉDUIRE
RETIREZ PAS LE COUVERCL
AUCUNE PIECE POUVANT E
UN RÉPARATEUR COMPÉTE
13
Publicidad
