Publicidad
Idiomas disponibles
Idiomas disponibles
loudspeaker, as shown in the illustration.
3. For a TV: Press the microphone into the plastic clip.
014R
4. For a TV: Turn on the TV and the Pocketalker. Adjust the
ernal
volume on both as needed.
rophone
Placement of Mic Clip on TV
3.5mm 12ft
(WCA 007)
External Microphone
Microphone Clip (includ-
WCA 007 WC)
Optional 3.5mm
12 ft Extension Cord
Using an Optional Neckloop
Williams Sound's optional neckloop (NKL 001-S) can be used with
the Pocketalker in situations where the user has a hearing aid with
a T-coil.
WARNING!
should not be used if there is a risk of getting it lodged or stuck in
machinery or other objects.
How it works: The Pocketalker picks up the sound with the
internal or external microphone, and sends it into the neckloop.
The neckloop magnetically couples with the T-coil in the listener's
hearing aid(s). With the hearing aid T-coil switch on, the listener
can hear the sound directly in their hearing aid(s).
To use the neckloop: Place the neckloop around your neck as
shown below. While holding the housing with one hand, pull up
16
TV Speaker
Adjusting
Neckloop
MIC 014-R
(included)
ed with
(WCA 007)
To prevent strangulation, the neckloop
on the cord lock bead with the other hand to tighten for comfort.
Plug the neckloop into the headphone jack on the Pocketalker.
Turn on the T-coil in the hearing aid(s). Turn on the Pocketalker
and adjust the volume to a comfortable listening level.
Using a Neckloop
Pocketalker
worn hanging
around the
neck with
the supplied
Pocketalker
Lanyard
A544
Operating the
Pocketalker
at a table using
the Lanyard as a
wrist strap
Cord Lock "Bead"
Pull up to tighten
Neckloop "Housing"
Hold down while
tightening
17
Publicidad
