Create CHEF VACUUM Manual Del Usuario página 12

Assembly and disassembly of clutch anti-vibration pad
•
The clutch anti-vibration pad is a fragile accessory. If the clutch anti-vibration pad is da-
maged and needs to be replaced, use a flat-blade screwdriver to pick it up and remove it.
•
Then align the new clutch in the direction of the arrow below and follow the clutch.
Note: When replacing the clutch, please be careful to avoid accidental injury. If necessary,
you can look for a professional to replace it.
• Upon completion of the cooking process, pour the cooked food out of the stirring container, and then
immediately fill it with clear water and use the Blend/Clean mode multiple times to better clean the stir-
ring container. Do not put the stirring container into water or other liquids, nor rinse it in water or other
liquids, so as to avoid electric leakage or mechanical damage.
• Before cleaning the main equipment, make sure to power it off. Use a wet cloth to scrub the exterior of
the main equipment, and do not put the main equipment into water or other liquids, nor rinse it in water
or other liquids, so as to avoid electric leakage or mechanical damage.
• When cleaning, please use clean water to rinse interior of the stirring container and its fittings, and then
wipe it dry. When cleaning the interior of the stirring container, please pay attention to the blades and
avoid injury.
• Do not use lacquer thinner, gasoline, cleanser, hard brush or stainless steel wool to rub, so as to avoid
scratching the stirring container's surface and leading to strange smell or allowing regeneration of bac-
teria.
• Fruits and vegetables release pigments during breakage, which may lead to colorization of the product's
plastic parts, but it's normal, though it's difficult to clean.
• Do not clean the stirring container until it's cooled down, so as to avoid scald due to residual heat.
• When the residues in the stirring container are hardened and difficult to remove, please first fill with
appropriate water to soak it for at least 30 min, and then clean and wipe it.
• If the heating pan's bottom is not cleaned appropriately after multiple cleaning, a light brown attachment
layer will emerge from the bottom. For that, please use detergent for long-time soaking, and then use a
cleaning cloth dipped with vinegar and scrub the bottom along the pattern.
• Do not soak any power consumption part of the main equipment, stirring container, power line, etc.
• Do not directly rinse the exteriors of the main equipment and the stirring container.
• Do not directly expose the product, power line and packing and accessory to sunlight.
• The product is adaptable to frequent use, so as to keep the motor and the interior of the main equipment
dry.
• If the product is to stay vacant for a long period, please keep proper custody of the product, ensure all
parts are cleaned and dry, and store it in a dry and well-ventilated place.
E NGL I SH
12
CLEANING AND MAINTENANCE