Descargar Imprimir esta página

Create CHEF VACUUM Manual Del Usuario página 14

Batidora calentadora al vacío

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
PROBLEM
Shut
down
during
operation.
Abnormal noise.
Intermittent
motor
operation.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
14
POSSIBLE CAUSE
Motor
over-temperature,
overheat protector activated.
Automatic power cut-off is
to protect the motor, which is
normal.
Operating power exceeds the
motor's maximum load power
due to excessive or pasty in-
gredients, and the overload
protector automatically di-
sconnects, which is normal.
Severe wear of the transmis-
sion.
Blade unit's bearing dama-
ged.
Severe wear of the blade
unit's stainless steel spline.
Severe wear of the blade
unit's anti-wear waterproof
gasket.
Motor carbon brush may be
worn.
SUGGESTED SOLUTION
Let it cool down to normal tempe-
rature naturally before automatic
startup.
Reduce the ingredient volume or
fill in water for dilution, and reduce
the viscosity o re-energize to po-
wer on after the overload protector
automatically connects.
Please contact our service point or
dealer.
Please contact our service point or
dealer.

Publicidad

loading