Publicidad
Idiomas disponibles
Idiomas disponibles
Product Installation
1. Install the charger against a wall and connect it to a
power supply.
>1.5m
Notes:
• Keep the charger away from direct sunlight.
• Never keep any items within 0.5m on the left and right sides of the charger and
1.5m in front of the charger.
• Pay attention to the power cable. Otherwise, it may be dragged by the robot,
resulting in displacement or power-off.
2. Remove the collision protection strip and protective
film.
Before using this product, remove collision protection strips on both
sides of the main unit.
>0.5m
3. Power-on and Charging
When this product is used for the first time, press and hold "
for 3s to turn it on. Align the main unit with charging clip and
manually set up the main unit on the charger. During the routine
operation, directly press "
Notes:
• If the main unit cannot be started due to low battery power, charge it through the
charger.
• The main unit will automatically start running once it is connected to the charger.
It cannot be turned off in the charging process.
09
" to start smart recharging.
"
Publicidad
