Publicidad
Idiomas disponibles
Idiomas disponibles
Product Use
ON/OFF
Press and "
" for 3s to turn on the main unit. The indicator will
be ON.
When the main unit is suspended but not charged, press and hold
"
" for 3s to power off this product.
Cleaning/Mopping
In the power-on status, press "
cleaning/mopping mode, depending on the accessories used.
Pause
When the main unit is working, press any button to stop it. Press
"
" once to continue running. Press "
recharging and complete the current task.
Sleep
In the non-charging status, the main unit will automatically enter
the sleep mode after 5min idling and be automatically shut down
after 6h sleep. In sleep mode, press any button to wake up the main
unit.
Tips: The main unit will not be in the sleep status in the charging process.
Water Filling into 2-in-1 Water Tank or Cleaning of Mop
When the main unit is running, press any button to pause, take out
the 2-in-1 water tank or mop for water filling or cleaning, and
reinstall them in place. Press "
" to automatically enable the
" again to start
" to continue operation.
Recharge
In the power-on status, press "
mode. The main unit will automatically enter the recharging mode
after working.
The indicator will flash white. In case of too low power in operation,
the main unit will be automatically charged.
Wi-Fi Resetting
When the main unit is powered on, press and hold "
for 3s until a sound is heard. If the indicator is flashing yellow, it
indicates that Wi-Fi has been reset successfully.
Network connection setting: Open App, add a device and follow the
prompts of App.
Tips: This product is only suitable for Wi-Fi networks with a frequency of 2.4GHz.
Edge cleaning
Choose the edge cleaning mode in App. The main unit will
automatically identify the cleaning area, conduct edge cleaning
and automatically enter the recharging mode after completing the
cleaning.
Target Cleaning
Choose a target in App. The main unit will automatically plan a
route and enter the recharging mode after cleaning.
Cleaning Reservation
Set a cleaning reservation task in App. The main unit will automati-
cally work within the specified time and automatically enter the
recharging mode after cleaning.
Tips: If "Do Not Disturb" mode is enabled, cleaning reservation will not be
supported within the "Do Not Disturb" period.
11
" to enable the recharging
" + "
"
Publicidad
