3 - Preliminary settings
ENG
A) Language, contrast, volume
When you start the stimulator for the
first time, you will need to choose the
interface language you wish to use from
the options screen. See below for in-
structions on how to proceed. There are
a range of settings that you can adjust
to suit your needs (interface language,
display contrast, backlighting, volume).
To change any of these settings, bring up
the options screen by holding the On/Off
button on the front of the stimulator for
a few seconds.
3a
3b: Use the channel 1 +/- button to
choose the language you wish to use.
3c: Use the channel 2 +/- button to
adjust the contrast of the screen.
3d: Use the channel 3 +/- button to
adjust the volume.
3e: Use the channel 4 +/- button to
adjust the backlighting.
On: Backlighting always on.
Off: Backlighting always off.
Auto: Backlighting activated whenever a
button is pressed.
3a: Use the On/Off button to confirm and
save your choices. The settings will be
applied immediately.
9
3b
3c
3d
3e
4 - Neurostimulation
programmes
To start the stimulator, press the On/
Off button. To choose a programme, you
must first choose a type of treatment
and a programme category.
NOTE: There is a table summarizing the
different programmes and their functions
at the end of this manual.
A) Choosing a type of treatment
4a
4b
4a: Press the On/Off button to turn off
the unit.
4b: Use the channel 1 +/- button to
choose another type of treatment (i.e.:
Specific Treatment or Conditioning).
4e: Press the channel 4 +/- button to
confirm your choice and access the pro-
gramme category selection screen.
Press the i button to access the Top 5
menu.
B) Choosing a programme category
5a
5b
5a: Press the On/Off button to return to
the previous screen.
5b: Use the channel 1 +/- button to
choose a category.
5e: Press the channel 4 +/- button to
confirm your choice and access the pro-
gramme selection screen.
Press the i button to access the Top 5
menu.
4e
5e