E) Programming Mode - CefarCompex Physio 5 Manual Del Usuario

E) Programming mode

ENG
In the programming mode you could
create a custom programme and select
your own parameters. Then name your
programme and save it in the custom
programmes category.
Go to the programming category.
Select NMES or TENS
Select the stimulation form
In order to personalize the parameters:
9a
9a: Press the On/Off button to return to
the previous screen.
9b: Use the channel 1 +/- button to
move the cursor between the different
settings.
9c: Use the channel 2 +/- button to
increase or decrease the setting values.
9e: Use the channel 4 +/- button to save
the programme.
11
9b 9c 9e
Saving programme
10a 10b 10c
10a: Press the On/Off button to return to
the previous screen.
10b: Use the channel 1 +/- button to
move the cursor in the programme name.
10c: Use the channel 2 +/- button to
write letters and figures.
10d: Use the channel 3 +/- button to
maximize or minimize the space.
10e: Use the channel 4 +/- button to
save the programme.
NOTE: You can save maximum 10 custom
programmes.
NOTE: Custom programmes can be com-
bined with a programme from the 2+2
list by adding and selecting the 2+2 op-
tion. This programme will consist of one
programme on channel 1+2 (P1) and one
programme for channel 3+4 (P2) (please
see section "Choosing the 2+2 function").
10d 10e