C) Choosing A Programme; D) Personalising A Programme - CefarCompex Physio 5 Manual Del Usuario

C) Choosing a programme

NOTE: Consult our Practical Guide for
help in choosing a programme. Once you
choose a category, the screen will display
a list of available programmes.
6a 6b
6a: Press the On/Off button to return to
the previous screen.
6b: Use the channel 1 +/- button to
choose the programme you want.
6e: Press the channel 4 +/- button to
confirm your choice. Certain programmes
start right away while others allow you
to specify additional options.
TOP 5
To access the Top 5 menu, press the i
button before selecting a programme.
The menu can be accessed from the
type of treatment screen (fig. 4), the
programme category screen (fig. 5), or
the programme list screen (fig. 6).
7a 7b
7a: Press the On/Off button to return to
the previous screen.
7b: Use the channel 1 +/- button to
choose the programme you want.
7d: Use the channel 3 +/- button to
personalize the programme.
7e: Press the channel 4 +/- button to
start the programme.
6e
7d 7e

D) Personalising a programme

Not all programmes have an option
screen.
In certain programmes, you will need
to choose the muscle group you want to
stimulate. The target area is shown in
black on the figure above channel 1.
8a 8b 8c
8a: Press the On/Off button to return to
the previous screen.
8b: Use the channel 1 +/- button to
choose the desired treatment area. You
can choose from 7 areas.
8c: Press the channel 2 + button to de-
lete the warming-up sequence and 2 - to
choose if you want to combine with any
of the 2+2 programmes on channel 3 and
4 (see explanation hereunder).
8d: Use the channel 3 +/- button to
choose the programme level.
8e: Use the channel 4 +/- button to
confirm your choices and start the
programme.
Choosing the 2+2 function
You have the possibility to choose the
2+2 function which means that you can
choose one programme for channels 1
and 2, then select one programme from
the 2+2 programme list for channels 3
and 4. So you can treat two different
body parts at the same time or combine
two different programmes on the same
body part.
NOTE: The timer for channel 1+2 will
control the total session time. This
means that the total time for channel
3+4 can not exceed the session time for
channel 1+2. The programme for channel
3+4 is always in one phase.
If a preset programme uses more than
two channels, it's not available for the
2+2 mode.
8d 8e
ENG
10