osann Eno360 SL Instrucciones De Instalación página 31

1 . Press the two side Isofi x connector buttons to extend the length of the Isofi x connectors.
2 . Fold out the stand below the child car seat. Pull the rotation lever and slide the stand further
forward.
3 . Guide the Isofi x connectors onto the Isofi x anchor points on the vehicle seat and ensure that
they lock into position.
4 . Push the child car seat in until it rests securely against the backrest of the vehicle seat. Ensure
that both Isofi x indicators have turned green.
5 . Adjust the height of the support leg and ensure that this is fully in contact with the footwell
of your vehicle.
6 . Ensure that the indicator on the support leg is showing green.
7 . When facing in the direction of travel, the child car seat offers 5 adjustable seat positions.
8 . When placing your child in the child car seat, turn the car seat towards the car door for con-
venience.
9 . Unfasten the belt buckle on the child car seat and place the belts over the outside of the seat.
10 . Put your child in the child car seat.
11 . Adjust the height of the headrest as described above.
12 . Fasten the belt buckle again until you hear a click.
13 . Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted.
14 . Turn the seat into the forward-facing position. Check that the child car seat is locked in this
position.
- 31 -
EN