LG DLEC885W Manual De Usuario página 5

S
afety Instructions
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following:
• Properly ground dryer to conform with all
governing codes and ordinances. Follow
details in the installation instructions. Electrical
shock can result if the dryer is not properly
grounded.
• Before use, the dryer must be properly
installed as described in this manual.
Electrical shock can result if the dryer is not
properly grounded.
• Install and store the dryer where it will not
be exposed to temperatures below freezing
or exposed to the weather.
• All repairs and servicing must be performed
by an authorized servicer unless
specifically recommended in this Owner's
Guide. Use only authorized factory parts.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• To reduce the risk of electric shock, do not
install the dryer in humid spaces. Failure to
follow this warning can cause serious injury,
fire, electrical shock, or death.
• Connect to a properly rated, protected, and
sized power circuit to avoid electrical
overload. Improper power circuit can melt,
creating electrical shock and/or fire hazard.
• Remove all packing items and dispose of all
shipping materials properly. Failure to do so
can result in death, explosion, fire, or burns.
READ ALL INSTRUCTIONS BEFORE USE
• Place dryer at least 18 in. above the floor for
a garage or basement installation. Failure to
do so can result in death, explosion, fire, or
burns.
• Keep all packaging from children. Packaging
material can be dangerous for children. There is
a risk of suffocation.
• Do not install nearby heat item. Such as
stove, cooking oven. Failure to do so can cause
damage, smoke, and fire.
• Do not place candle and cigarettes on top of
the product. Failure to do so can cause
damage, smoke, and fire.
• Remove all protective vinyl film from the
product. Failure to do so can cause damage,
smoke, and fire.
• Certain internal parts are intentionally not
grounded and may present a risk of electronic
shock only during serving.
Service personnel - do not contact the following
parts while the appliance is energized: Motor
• To avoid physical injury and burns, use care
when cleaning the condenser and do not touch
or clean the condenser with bare hands.
• Do not use replacement parts that have not
been recommended by the manufacturer (e.g.
parts made at home using a 3D printer).
F
5