METRO PROFESSIONAL GSM1010 Instrucciones página 4

FUNCTIONAL PROBLEMS
If the appliance doesn't start
- Check that the machine is plugged in
- Check that the electrical supply at the socket is working correctly.
EN
- For GSM1010, GSM1015 and GSM1015D models, check that the "On"
button (6) and the safety button (7) are being pressed at the same time.
See figure 3
- For GSM1060 models, check that the "On" button (9) and the safety
button (11) are being pressed at the same time. See figures 4 and 5.
- If the liquidiser is hot, the thermal protector may have been activated.
Wait a few minutes until the liquidiser has cooled down
- If the problem persists, consult the METRO technical service.
If the appliance stops during operation
- The motor has a thermal protection device which causes it to stop if it
becomes overloaded.
- If the appliance is hot, unplug it and wait a few minutes until the motor
has cooled down and the thermal probe has reset itself (only GSM1060
models).
- If not, check that the electrical supply at the socket is working correctly.
- If the problem persists, call a METRO technical service.
WARRANTY
A statutory warranty applies for this product.
Damages caused by wrong treatment or operation, by false placement
or storage, improper connection
or installation, as well as force or other external influences are not
covered by this warranty. We
recommend careful reading of the operating instructions as it contains
important information.
Note:
1. In case this product does not function correctly, please firstly check if
there are other reasons, e.g.
for electrical appliances interruption of the power supply, or generally
incorrect handling are the
cause.
2. Please note that, where possible, the following documents or rather
information should be provided
together with your faulty product:
- Purchase receipt
- Model description/Type/Brand
- Describe the fault and problem as detailed as possible
In the case of a claim for guarantee or defects, please contact the seller.
SPECIFICATIONS
E
lEctrical supply
l
oading
s (r.p.m.)
pEEd
- Fixed
- Variable
l
Ength
- Liquidiser arm
ø Blade hood
- Total
n
Et wEight
GSM1010
230 V / 50-60Hz / 1~ 230 V / 50-60Hz / 1~
250 W
1/3 Hp
9,000
-
200 mm
65 mm
500 mm
1,9 kg
DISPOSAL
Environmental Protection
Discarded electric appliances are recyclable and should not be
discarded in the domestic waste! Please actively support us in
conserving resources and protecting the environment by retur-
ning this appliance to the collection centres.
Dispose of packaging in accordance to applicable legal regu-
lations.
GSM1015 GSM1015D
230 V / 50-60Hz / 1~
250 W 250 W
1/3 Hp 1/3 Hp
9,000
- 1500-9000
290 mm 290 mm
82 mm 82 mm
565 mm 565 mm
1,9 kg 1,9 kg
- 4 -
GSM1060
230 V / 50-60Hz / 1~
350 W
1/2 Hp
- 9,000
-
425 mm
94 mm
735 mm
3,55 kg