Publicidad
Idiomas disponibles
Idiomas disponibles
11. The lowest current for measuring is 10% of the range nominal value.
It is important to consider that the measurement errors increase while
test current decreases. The error is specified for test currents higher
than 80%.
12. The value can be stored in the
internal memory by pressing the
button Save.
13. Press the red button Stop in
order to finish the measurement.
14. Finally, when finishing
measurements, turn the
equipment off using the On/Off
switch.
Precaution: Do not connect or disconnect the test leads during the
measurement.
18
Publicidad
