Publicidad
Idiomas disponibles
Idiomas disponibles
G
M
UK
iordani
etropolitan
STROLLER
HOW TO OPEN THE STROLLER
1.
According to Fig. 1a/1b/1c/1d, release the folding
hook, which keeps the stroller closed. Then lift up
the handle as shown by the arrow, the stroller will
be opened fully when you hear a CLICK.
ASSEMBLING THE WHEELS
2. Assembly of the front wheel:
as shown in Fig. 2a
insert the front wheel axles into the front housings
and a CLICK indicates that they are correctly fixed.
Assembly of the rear wheel:
as shown in Fig. 2b
insert the rear wheel axles into the rear housings,
and a CLICK indicates that they are correctly fixed.
ATTENTION:
Try moving and rotating all the
wheels manually to make sure all the wheels are
firmly fixed in the housings before use.
SEAT UNIT ASSEMBLY
3.
Fasten the Velcro in the direction of the arrow
as shown in Fig. 3a, and then attach the button to
the bottom of the stroller mat. The seat unit is now
completely assembled, as shown in Fig. 3b.
4. Seat unit assembly:
As shown in Fig. 4a, fix both
adaptors A of the seat unit onto the seat supporting
base B simultaneously; they are fixed together
firmly when you hear a "CLICK".
5. Fixing the footrest leg:
As shown in Fig. 5a, press
both sides of clips C with your finger, then push the
leg D into the plastic connecting parts. A "CLICK"
confirms it is steadily fixed (see Fig. 5b).
6. Fixing the front bar:
As shown in Fig. 6a, grasp
the front bar and press down the white buttons
on both sides simultaneously. Then fix the front
bar onto both sides of the stroller until you hear
a "CLICK".
7.
As shown in Fig. 7a/7b/7c, unzip the canopy in
the direction of the arrow, then push the canopy
forward, the stroller is firmly and correctly opened.
ASSEMBLING AND DISASSEMBLING THE CANOPY
8. Canopy detachment:
Hold the plastic part C and
pull it out from the plastic holder slot D as shown
by the arrow, see Fig. 8d/8e; See Fig. 8a, pull out
the canopy fabric as shown by the arrow, (see Fig.
8f), pull out the iron bar E from the plastic holder
slot as shown by the arrow, the canopy can be
detached completely.
p
modular system
ro
(FROM 0 TO 36 MONTHS APPROXIMATELY)
9. Canopy assembly:
See Fig. 8a/8b Insert the rear-
end A of the canopy fabric into the seat slot B, using
one hand press and push the fabric into the slot
and at the same time pull the front of fabric using
the other hand as shown by the arrow, the canopy
is fitted. See Fig. 9a, insert the canopy post into the
canopy base as shown by the arrow, make sure dot
G of the base is fixed in the hole of the post. See
Fig. 9b/9c/9d, Insert the front-end B of the canopy
fabric into the front of the canopy tube, then fix
the tube in the canopy post slot as shown by the
arrow. The canopy is now assembled completely
(see Fig. 8).
HANDLE OPERATION
10. Handle height adjustment:
see Fig. 10, press the
button down with one hand and the handle up
or down. It is recommended to adjust the handle
height.
REVERSIBLE SEAT
11. Quickly release of the seat unit:
11b/11c, press down the safety lock on both sides
of the seat at the same time and lift it up. The seat
can be removed quickly or placed in the opposite
direction.
ATTENTION:
Keep your child away from the stroller
when you release the seat unit.
SEAT ADJUSTMENT
12.
Press down the adjuster on the backrest or rotate
the knob, the angle of the backrest is adjustable.
The seat can be adjusted in 4 positions.
CONVERSION OF SEAT UNIT TO SOFT PRAM
13.
Firstly, reverse the seat unit as shown in Fig. 13a.
Press button 1 to adjust the seat unit to a
horizontal position, then press button 2 in B
mode as shown in Fig. 13b, and finally release the
lock 3 as shown in Fig. 13c to change the seat unit
into a cot as shown in Fig. 13d. To perform the
opposite operation, rotate button 2 clockwise in
A mode, and fasten lock 3 to change the cot into
the seat unit.
Note:
In order to ensure your baby's safety, always
keep the cot facing you when using it (see Fig. 13d).
BACKREST AND FOOTREST OPERATION
14.
Press down the backrest buttons and move
48
it up and down, the footrest can be adjusted
in 3 positions (see Fig. 14a).
QUICK RELEASE OF THE FRONT BAR
15.
See Fig. 15a. Press down the button on both sides,
then pull out the front which is quickly released.
WHEELS OPERATION
16. Front wheel lock:
lever in the direction of the arrow; when you hear
a "CLICK" the wheel is locked in placed, as shown
in Fig. 16a.
17. Front wheel quick removal:
wheel quick-release button, the front wheels will
be released automatically.
18. Rear wheels brake:
lock lever down as shown in Fig. 18a. Press the
brake lever down in the same way to release the
stroller. (Red means in brake condition, Green
means in movement condition).
19. Detachable rear wheels:
press the quick release button in the direction
of the arrow. Then the wheels can be pulled out
quickly.
ssee Fig. 11a/
FITTING THE SAFETY BELT
20.
Pass the buckles of the 3-point belt A and waist
belt B through the eyelets located on the seat pad
and the stiff board hidden in the side of the seat
pad. Make sure they are attached firmly before use
(see Fig. 20a/20b).
21.
Adjust the safety belt height, pull the fabric
indicated in Fig. 21a and then use the same
installation method as the first points, see
Fig. 20a/20b.
22.
Pass the crotch strap through the seat pad and
the stiff board hidden in the side of the seat pad
as shown by the arrow in Fig. 22a. Always make
sure they are attached firmly before use. The safety
belts are correctly fitted as in Fig. 22b.
SAFETY BELT REMOVAL
23.
Detach the 3-point belt H and waist belt I by pulling
out the buckles from the seat pad (see Fig. 23a).
ATTENTION:
- Please remove the seat belt from the stroller
when using it as a cot.
- Please fix the stroller seat belt when using it as
a seat.
ATTACHING THE BUCKLES
24. Attaching the buckles:
the buckles on the 3-point belt (C, D) on
the buckles of the centre belt (A, B), and
then attach the waist buckles on the central
belt until you hear a CLICK (See Fig. 24b).
Attaching the belt:
central button to release the waist strap.
Adjusting the seat belt:
and waist belt according to the size of the child so it
push the front wheel locking
is in a comfortable position (see Fig. 24c).
25.
The height of the 3-point belt is adjustable in
2 positions (see Fig. 25a), the lowest position
(position 2) is only for babies under 6 months,
press down the front
and position 1 is for babies between 6 and
36 months. Adjust the height of seat belt
by pulling the buckles out of the seat. Then
to apply the brakes press the
attach them at the same level, always make
sure the buckles are in the correct position.
Note:
always use the safety harness when the child
is in the stroller.
As shown in Fig. 19a,
OPTIONAL ACCESSORIES
26. Fitting the car seat:
seat on the stroller support base, push it down until
you hear a CLICK
27. Disassembling the car seat:
safety lock and raise the button with your hand as
shown in the picture; lift the child seat upwards with
the other hand at the same time using the handle to
release the seat from the frame (see Fig. 27a).
Note:
For security reasons, it is necessary to check
again the pull clasp after fixing the car seat onto
the stroller frame, if the pull clasp does not return
completely push the plastic part to the end.
28. Fitting the carrycot:
stroller support base, then push down until you
hear a "CLICK", as shown on Fig. 28a.
29. Disassembly:
in the direction of arrow A with your thumb,
and pull up the pull-button in the direction of
arrow A simultaneously, then lift the carrycot to
release it from the stroller.
30. Safety Belt:
safety belt inside. Press the red button as shown
in Fig. 30a, the safety buckle will be released.
Note:
- please make sure you keep the baby facing
(see Fig. 24a), attach
you when using the components, it is important
49
(see Fig. 24a), press the
Adjust the 3-point belt
HOW TO USE THE CAR SEAT
as shown in Fig. 26a, put the car
release the additional
HOW TO USE THE CARRYCOT
put the carrycot on the
push the button to the right
the carry cot is equipped with a
Publicidad
