Descargar Imprimir esta página

Johnson JINDU3291 Manual De Instrucciones página 32

Placa de inducción

Publicidad

Idiomas disponibles

Idiomas disponibles

2.4 Before using your New Induction Hob
Read this guide, taking special note of the 'Safety Warnings' section. Remove any protective
film that may still be on your Induction hob.
2.5 Technical Specification
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve
our products we may change specifications and designs without prior notice.
3. Operation of Product
3.1 Touch Controls
The controls respond to touch, so you don't need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil
or a cloth) covering them. Even a thin film of water may make the controls difficult to
operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
JINDU3291 / JINDU3291B
3 Zones
220-240V~ 50Hz or 60Hz
7400W
590X520X60
560X490
9
V.1

Publicidad

loading

Este manual también es adecuado para:

Jindu3291b