Publicidad
Idiomas disponibles
Idiomas disponibles
6. Care and Cleaning
What?
Everyday soiling
1. Switch the power to the cooktop off.
on glass
2. Apply a cooktop cleaner while the
(fingerprints,
marks, stains
3. Rinse and wipe dry with a clean cloth
left by food or
non-sugary
4. Switch the power to the cooktop back
spillovers on the
glass)
Boilovers, melts,
Remove these immediately with a fish
and
slice, palette knife or razor blade
hot sugary spills
scraper suitable for Induction glass
on
cooktops, but beware of hot cooking
the glass
zone surfaces:
1. Switch the power to the cooktop off at
the wall.
2. Hold the blade or utensil at a 30°
angle and scrape the soiling or spill to
a cool area of the cooktop.
3. Clean the soiling or spill up with a dish
cloth or paper towel.
4. Follow steps 2 to 4 for 'Everyday
soiling on glass' above.
Spillovers on the
1. Switch the power to the cooktop off.
touch controls
2. Soak up the spill
3. Wipe the touch control area with a
4. Wipe the area completely dry
5. Switch the power to the cooktop back
7. Hints and Tips
Problem
The induction hob
cannot be turned on.
How?
glass is still warm (but not hot!)
or paper towel.
on.
clean damp sponge or cloth.
with a paper towel.
on.
Possible causes
No power.
• When the power to the cooktop is
switched off, there will be no 'hot
surface' indication but the cooking zone
may still be hot! Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner or
scourer is suitable.
• Never leave cleaning residue on the
cooktop: the glass may become stained.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe the
touch control area dry before turning the
cooktop back on.
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you've checked everything and
the problem persists, call a
qualified technician.
17
Important!
What to do
V.1
Publicidad
