Husqvarna TS 300 E Manual Del Usuario página 8

To do a check of the blade guard
1. Make sure that the blade guard is correctly attached
before you start the product. Do not use the product
if the blade guard is missing, has cracks or other
damage.
2. You must replace the blade guard if it has cracks or
is damaged.
ON/OFF buttons
The ON/OFF buttons are used to start and stop the
product.
To do a check of the ON/OFF buttons
1. Push the ON button to start the product.
2. Make sure that the product starts.
3. Push the OFF button to stop the product.
4. Make sure that the product stops.
Locking hook function, conveyor cart
The locking hook function is used to lock the conveyor
cart in position during transport.
8
To do a check of the locking hook function, conveyor
cart
1. Pull out the locking hook and push the locking hook
to the right to put it in the locked position.
2. Make sure the conveyor cart is locked in position.
Pinch protection function, conveyor cart
The Pinch protection function of the conveyor cart is
used to make sure that you do not pinch your hands
during operation.
To do a check of the pinch protection, conveyor cart
1. Turn the locking hook (A) 180 degrees to get the
pinch protection (B) out.
A
B
2. Make sure there is space between the pinch
protection and the frame.
2282 - 002 - 07.02.2024