English
English
About this document
Comply with the following aspects for safe use
of the product.
• Read this document carefully before use.
• Keep this document for subsequent
reference.
• Hand this document on to the end-user and
the vehicle user.
This document forms an integral part of the
product and is an important component of the
safety concept. Failure to comply can lead to
serious injury or death.
Conventions
This document includes symbols and text
highlighting. The meanings are explained
below.
Cross-reference
Figures are listed in the end of this document.
A reference to a figure is formatted as follows:
1
6
Page number
Figure number
Representation
This symbol marks a call for action.
▶
Contact
Check our website to find a contact near you.
9
GA 00022 | 2021-07-06 | 5.0
Product description
Frame
1)
A
B
Gas pressure spring
C
Limit stop
D
Holder
E
Holder
F
Locking pin
1)
1
28
The interior ladder lift is mounted inside on
the roof lining of the vehicle. The built-in gas
pressure spring B enables the ladder to be
secured between holders D and E.
For your safety
Risk of impact from holders
The interior ladder lift is installed in the vehicle
at head height. Minor to moderate head
injuries can result from rapid and careless
body movements.
▶ Move with care when inside the vehicle.
▶ Fold back the holders when the interior
ladder lift is unladen.
▹
Pull out locking pin F.
▹
Fold up holder E.
▹
Engage locking pin F.
Operator's obligations
Check the product regularly for wear or
damage.
• If the product is worn or damaged, then
remove the product immediately.
• The repairs should only be carried out by
certified contacts.
Intended use
The interior ladder lift is designed solely for
installation inside a suitable vehicle on the
roof pillar. The vehicle must have a metal roof
pillar. The interior ladder lift is designed to
secure the load of a ladder.
Foreseeable incorrect use
Modifications to the product are prohibited.
Failure to comply can lead to serious injury or
death.
© Sortimo International GmbH
4
30
5
30