Publicidad
Idiomas disponibles
Idiomas disponibles
Mode Selection
P13
at the end of
Start Back-Tack-
ing
Soft Start
P14
Make up pin
P15
mode
Stitch Bal-
P18
ance for Start
Back-Tacking 1
Stitch Bal-
P19
ance for Start
Back-Tacking 2
Mode Selec-
P20
tion for End
Back-Tacking
Foot pedal re-
P24
verse voltage
Stitch Bal-
P25
ance for End
Back-Tacking 3
Stitch Bal-
P26
ance for End
Back-Tacking 4
Mode Selection
P28
for Bar-Tacking
Tangent after
P29
braking force
Thick material
P30
angle
Cutting angle
P31
CON/
CON
CON: At the end of Start Back-Tacking, machine
STP
continues sewing if pedal pressed or START
signal on (standing operation)
STP: At the end of Start Back-Tacking, machine
stops
ON/
ON
ON: Slow start feature activated. OFF: Slow start
OFF
feature deactivated.
0-4
2
0: Semi-pin mode
1: Pin mode
2: Continuous half-needle fi lling mode
3: Continuous injection mode
0-200
131
A starting back seam segment stitches compen-
sation 0-200 movement gradually lag; the larger
the value, A short last longer needle, B section
of the fi rst needle is shorter
0-200
165
Starting back seam B segment stitches compen-
sation 0-200 movement gradually lag; the larger
the value, paragraph B last longer needle
0-2
1
A: Pedal full heeling, it will automatically execute
end Back-Tacking
30-500
110
0-200
131
Starting back seam segment stitches compensa-
tion C, 0-200 movement gradually lag; the larger
the value, the shorter the C section of the fi rst
pin
0-200
165
D starting back seam segment stitches compen-
sation 0-200 movement gradually lag; the larger
the value, C section last a longer needle, the fi rst
needle is shorter segment D
0-2
1
Continuous back seam segment, rewind sole-
noid operation timing:
0: controlled by the pedal can be arbitrarily stop-
ping and starting.
1: Touch the pedal, automatically performs back
tacking action;
2: pause mode
1-45
20
0-100
0
The larger the value the greater the intensity,
the adjustment is too large may cause the motor
abnormalities.
0-100
30
The larger the value the greater the intensity,
the adjustment is too large may cause the motor
abnormalities.
7
Publicidad
