Olimpia splendid Bi2 WALL TR 1000 Instrucciones Para El Uso página 77

7.4.1 - Insertion of batteries
To insert the batteries correctly (fig. 19):
a. Remove the batteries compartment cover.
b. Insert the batteries into the relevant compartment.
Check the polarity indicated on the bottom of the compartment.
c. Close the compartment correctly.
19
7.4.2 - Replacement of batteries
The average life-span of the batteries, with normal use, is approx. six months.
Replace the batteries when the "beep" for reception of the command from the appli-
ance is no longer heard.
Always use new batteries and replace both at the same time.
The use of old or different batteries could generate malfunctioning
of the remote control.
The remote control uses two dry alkaline 1.5V batteries (AAA.LR03) (fig. 19).
When replacing batteries, replace both and dispose of the dead
batteries in the appropriate collection centres and as required by
law.
• If the remote control is not used for several weeks or longer, remove the batteries.
Any leaks from the batteries could damage the remote control.
Do not re-charge or disassemble the batteries. Do not throw the
batteries into the fire. They can burn and explode.
If the battery liquid falls onto the skin or clothes, wash well with
clean water. Do not use the remote control with batteries that have
leaked. The chemical products contained in the batteries can cause
burns or other risks to health.
Bi2 WALL TR 1000/1200/1400
EN - 29