Publicidad
Idiomas disponibles
Idiomas disponibles
Winding the bobbin
1
Place the thread and spool holder
onto the spool pin.
4
1
2
Place the thread end through one
of the inner holes as illustrated
and place the empty bobbin on the
spindle.
7
After the bobbin has wound a few
turns stop the machine and cut the
thread near the hole of the bobbin.
Continue filling the bobbin until it is
full. Once the spool is full, it rotates
slowly. Release the pedal or stop the
machine. Push the bobbin winder
spindle to the left.
2
Draw the thread from the spool
through the upper thread guide.
5
Push the bobbin to the right and
hold the thread tail securely in one
hand.
8
Use a bobbin that has been correc-
tly wound with thread, otherwise
the needle may break or the thread
tension will be incorrect.
17
3
Wind the thread clockwise around
the bobbin winder tension discs.
6
Press on the foot control to start
winding the bobbin.
9
When the bobbin winder spindle is
placed on the right, „bobbin winding
position", the machine will not sew
and the handwheel will not turn. To
start sewing, push the bobbin winder
spindle to the left „sewing position".
EN
Publicidad
