10. H-Fan button
Change the unit fan speed to a high, intense output.
POINTING THE REMOTE CONTROL
Point your remote control directly toward the control panel of your air conditioner unit.
The device will emit a "beep" indicating that the command was received. If your unit does
not respond to the remote control unit, ensure the batteries are correctly inserted (polar-
ity, or the direction of the +/- symbols) or insert new batteries.
INSERTING BATTERIES
To insert batteries into the remote control, press firmly and slide the cover on the back
side gently in the direction of the arrow. Insert the batteries while paying close attention
to the polarity (the direction of the +/- symbols). Replace the back cover carefully.
NOTE: never mix battery types such as using an old and new battery or a lithium or re-
chargeable battery with an alkaline battery.
REMOTE CONTROL SAFETY INFORMATION
1. Never place the remote control near a heat source such as an electric blanket, a
space heater, or in direct sunlight.
2. Avoid accidentally dropping the remote control
3. Do not place objects that block or interfere with the infrared remote control sig-
nals.
4. Do not splash water or other liquids on the remote control
5. Do not place heavy objects on the remote control.
6. Do not stand, sit, or bear unnecessary weight on the remote control.
7. Replace batteries as needed, such as when the air conditioner unit does not re-
spond to the remote control unit.
8. Remove batteries when the remote control unit will be unused for prolonged pe-
riods of time.
9. Dispose of batteries and the remote control in accordance with local laws and
recycling instructions. Contact your municipality or waste management company
for further information.
–5–