Descargar Imprimir esta página

Husqvarna P 524XR EFI Manual De Usuario página 23

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
button when you turn the product. Too
fast operation speed can cause the
product to skid or fall.
Move smoothly and slowly on slopes. Do not make
sudden changes in direction.
Turn slowly and gradually when you move down a
slope. Move at low speed.
WARNING:
can cause the product to slide or fall
on a slope with an angle less than the
maximum possible slope angle.
Do not operate the product with the remote control
on ground that slopes more than 20° when you cut
grass on a slope from side to side.
It is recommended to cut the grass on a slope from
side to side moving the product up the slope.
Do not operate the product with the remote control
on ground that slopes more than 30° when you
cut grass up and down the slope. Only operate on
ground that slopes 30° on dry and stable ground.
When you cut the grass up and down the slope, turn
where the slope angle is decreased.
If the slope angle is too large at the turn, move up
the slope and move in reverse down the slope.
1
ISO 13849-1:2015 Category 1 PL c
1929 - 003 - 05.12.2023
Do not push the boost
The operation speed
Safety devices on the remote control
WARNING:
instructions that follow before you use the
product.
Do not use a remote control with safety devices that
are damaged or do not operate correctly.
Do a check of the safety devices regularly. If
the safety devices are damaged, speak to your
Husqvarna service agent.
Do not make modifications to safety devices.
Remote control harness
Always use the remote control harness when you
operate the product. If you do not use the remote
control harness, you cannot operate the product safely.
This can result in injury to you or other persons. Make
sure that the remote control is correctly attached to the
remote control harness. This is to prevent the remote
control from falling and become damaged and to prevent
accidental start.
Machine stop button on the remote control
The machine stop button
disengages the drive of the cutting deck and applies the
parking brake.
Read the warning
1
quickly stops the engine,
23

Publicidad

loading