Sub-Zero Designer Serie Guia De Instalacion página 8

Site Preparation
Anti-Tip Bracket
WARNING
To prevent the unit from tipping forward, the anti-tip
bracket must be installed.
The back of the anti-tip bracket must be installed 24"
from the front of the unit (without panels). Use all the anti-
tip bracket hardware as instructed for wood or concrete
floors.
IMPORTANT NOTE: For wood or concrete floor applica-
tions, if the #12 screws do not hit a wall stud or wall plate,
use the #8 screws and #12 washers with the wall anchors.
IMPORTANT NOTE: In some installations, the subflooring
or finished floor may necessitate angling the screws used
to fasten the anti-tip bracket to the back wall.
ANTI-TIP HARDWARE
1 Anti-tip bracket
12 #12 x 2 1/2" pan head screws
4 3/8"–16 x 3 3/4" wedge anchors
12 #12 flat washers
4 #8–18 x 1 1/4" truss head screws
4 Nylon Zip-it ® wall anchors
8 | Sub-Zero Customer Care 800.222.7820
WOOD FLOOR APPLICATION
After properly locating the anti-tip bracket in the opening,
drill pilot holes 3/16"
or wall plate. Use the #12 screws and washers to secure
the brackets. Verify the screws penetrate through the floor-
(610)
ing material and into the wall studs or wall plate a minimum
of 3/4" . Refer to the illustration and chart below.
(19)
CONCRETE FLOOR APPLICATION
After properly locating the anti-tip bracket in the opening,
drill pilot holes 3/16"
or wall plate. Drill 3/8"
a minimum of 1 1/2"
washers to secure the brackets to the wall, and use the 3/8"
wedge anchors to secure the brackets to the floor. Verify
the screws penetrate the wall studs or wall plate a mini-
mum of 3/4" . Refer to the illustration and chart below.
(19)
ANTI-TIP BRACKET PLACEMENT
18" Model
24" Model
27" Model
30" Model
36" Model
A
WALL PLATE
SUBFLOORING
WOOD FLOOR
Wood floor
diameter maximum in the wall studs
(5)
diameter maximum in the wall studs
(5)
diameter holes into the concrete
(10)
deep. Use the #12 screws and
(38)
A
A
FINISHED
FLOORING
WALL PLATE
SUBFLOORING
CONCRETE
FLOOR
Concrete floor
A
9"
(229)
12"
(305)
13 1/2"
(343)
15"
(381)
18"
(457)
A
FINISHED
FLOORING
1 / "
1
2 (38)
min