EINHELL AGILLO 36/255 BL Manual De Instrucciones página 14

use the equipment.
•
Stop using the equipment when there are
people – particularly children – or pets nearby.
•
Never use the machine if protective
equipment is damaged or missing.
•
Never mount metal cutting elements. Never
replace the non-metal cutting unit with a
metal cutting unit.
If it is used for a lengthy period, the vibrations
it causes in the hands of the user may result
in circulation problems (hand-arm vibration
syndrome).
White fi nger syndrome is a vascular disease that
involves seizure-like spasms of the fi ngers and
toes. The aff ected areas are no longer suffi ciently
supplied with blood and therefore appear
extremely pale.
The frequent use of vibrating equipment may
trigger nerve damage in people with an impaired
circulation (for example smokers, diabetics).
Should you observe any unusual impairments,
interrupt your work immediately and consult a
doctor.
Follow these instructions in order to reduce the
dangers:
•
Keep your body and in particular your hands
warm when working in the cold.
•
Take regular breaks and move your hands
to stimulate the blood circulation during the
breaks.
•
Ensure that the equipment makes the
least possible vibration through regular
maintenance and solid parts on the
equipment.
Safety precautions for handling the blade
•
Take not of all warnings and instructions
relating to operating and fitting the blade.
•
The blade can recoil suddenly from objects
if it cannot cut or mow through them. This
can cause injuries to the arms or legs. Keep
bystanders and animals at least 50 feet (15
meters) away from where you are working.
If the equipment strikes a foreign body, stop
the engine immediately and wait for the blade
to come to a standstill. Check the blade for
signs of damage. Always replace the blade if
it is bent or cracked.
•
The blade is liable to catapult away objects
with high force. This can cause blindness or
injuries. Wear protection that complies with
ANSI Z87.1, face and legs. Always remove
objects from your working area before you
Anl_Agillo_36_255_BL_SPK7_USA.indb 14 Anl_Agillo_36_255_BL_SPK7_USA.indb 14
EN
use the blade.
•
Carefully check your machine and its fittings
for signs of damage every time before use.
Do not use the equipment unless all the blade
fittings are installed correctly.
•
When you release the throttle lever, the blade
will continue to rotate and will only gradually
come to a standstill. A blade which is in the
process of rotating to a standstill can cause
you or bystanders injuries through cutting.
Before you start any work on the blade, switch
off the engine and ensure that the blade has
come to a standstill.
•
The danger zone has a radius of 50 ft. (15 m).
Bystanders may suffer blindness or injuries.
Keep a distance of 50 ft. (15 m) between
yourself and other people or animals.
Important: The cutting unit continues to run
for a few seconds after the motor is switched
off .
The cutter continues to rotate!
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Battery mount
2. On/Off switch
3. Safety lock-off
4. Strap attachment
5. Additional handle attachment
6. Top part of long handle
7. Handle connecting piece
8. Union nut
9. Bottom part of long handle
10. Motor housing
11. Spool housing
12. Locking lever
13. Line safety guard
14. Thread cutter
15. Guard hood
16. Additional handle
17. Handle screw
- 14 -
07.12.2023 14:06:05 07.12.2023 14:06:05