Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety Instructions
yWARNINGy
To reduce the risk of fire, electrical shock,
or injury when using your Beer Dispenser,
follow these basic precautions:_
•
Read all instructions before using the refrigerator.
•
DANGER or WARNING:
Risk of child entrapment.
•
Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
•
Never allow children to operate, play with, or crawl inside the refrigerator.
•
Never clean refrigerator parts with flammable fluids. The fumes can create a fire
hazard or explosion.
•
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other refrigerator. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
>
Before Using Your Beer Dispenser
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
•
Instruction manual
•
Instruction video
•
1 Safety Guard Rail
•
1 Drip Tray (2 Pieces)
•
1 Cylinder Support
•
1 C02 Regulator (Box)
•
1 C02 Empty Cylinder (Box)
•
1 C02 Air Line Hose (Red)
•
2 C02 Hose Connectors
•
1 Beer Keg Coupler (Box)
•
1 Beer Tower
•
1 Pull Handle (Beer Tower Faucet)
•
1 Spanner Faucet Wrench (see illustration on page 10)
•
6 Plugs (Guard Rail)
•
1 Beer Keg Stand
•
1 Metal Plate For Cabinet Bottom
•
Before connecting the Beer Dispenser to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
>
Installation of Your Beer Dispenser
•
This appliance is designed to be free standing only, and should not be recessed or built-in.
•
Place your Beer Dispenser on a floor that is strong enough to support the Beer Dispenser
when it is fully loaded.
•
Allow 3 inches of space between the back and sides of the Beer Dispenser, which allows the
proper air circulation to cool the compressor.
•
Locate the Beer Dispenser away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
-etectrteat-eonstrmption. Extreme cold -ambtent—temperatures may-ateo-eaese—the—Beer-
6
Publicidad
