How to take your own Blood Pressure
Fitting the cuff
Open cuff into a ring shape and pull onto your upper left
arm until the lower cuff edge lies 2 – 3cm above
the elbow ensuring that the special marking is posi-
tioned directly on the artery. The metal ring must never
come to lie on the artery as this may cause a false
reading.
Gently pull the cuff end that feeds through the metal
ring and place it up and outside around your arm. Close
velcro fastening with a light pressure.
The cuff must not be too tight. There should roughly be
space for two fingers between arm and cuff.
Note on cuff sizes:
This unit must only be used with the following cuff
types:
Type
Size of Arm
Rubber Bag
CA01
13 x 25 cm
CA02
14 x 30 cm
* comes as standard
Circum-
Order Number
ference
22 – 32 cm
143-4-750*
33 – 41 cm
143-4-757
Important :
A measurement should not take longer than 2 minutes. In
case of an error the measurement can be interrupted at
any time by opening the velcro fastening of the cuff.
23