boso medicus family Manual Del Usuario página 27

How to record blood pressure values in your record card
and recall the average value (including evaluation according WHO)
Note the measured values in your blood pressure
record card (two cards are included).
Enter each individual measurement.
Recall the individual average value after 30 measure-
ments and note it in its designated column of the BP re-
cord card. The average value is recalled by pressing the
relevant symbol button for about 3 seconds while the
unit is switched off. The average value of all stored va-
lues (systole and diastole) appears. In the „pulse" dis-
play the number of retained measurements flashes.
The symbol button of the displayed value is illuminated
in green colour.
If there is no measurement stored in the memory,
the display for the number of measurements taken
AOO
flashes „ ". The systole and diastole displays each
O
show „ ".
Only the left side of the display appears an index relating
to the average value. The evaluation scale immediately
shows you where your blood pressure value ranges,
according to the WHO classification (see page 20).
M
Evaluation in accordance with WHO
classification
Too high
Normal – borderline
Normal
Optimum
Average value
Systole
mmHg
Average value
Diastole
mmHg
Number of
measurements
27