boso medicus family Manual Del Usuario página 26

Display of Measured Values
As soon as the first pulsations are registered, symbol
flashes in Pulse rhythm.
After completion of a measurement the built-in magnetic
valve opens automatically to allow rapid deflation of the cuff.
For each symbol and
store for 30 measurements each.
The measurement ist stored automatically (Exception:
guest mode, see page 25). As soon as your memory store
is full (30 measurements maximum) the oldest measure-
ment gets deleted and the latest one is stored.
Invalid measurements are not stored in the memory.
If symbol appears following a completed measurement,
it is recommended that the measurement is repeated while
holding the arm motionless.
A renewed display of symbol
surement with the arm being held motionless, can be an indi-
cation of irregular heart beat. Discuss this matter with your GP
on your next visit.
The unit switches off automatically after approximately one
minute. To repeat a measurement press your symbol button
again briefly.
If no further measurement is required, remove cuff.
26
the unit has an individual memory
following the repeat mea-
Interruption of a measurement :
A measurement can be interrupted at any stage
by simply pressing your symbol button again. This trig-
gers the automatic air release from the cuff (For furt-
her measurement press your symbol button again).
Systole
mmHg
Diastole
mmHg
Puls/min.