Publicidad
Idiomas disponibles
Idiomas disponibles
36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
6
Oven Rack Installation
6.1
Installing the glide rack
1.
Obtain left hand side rack and left hand slide –
see image to identify.
2. The shaded wires indicate the wire the slide can
be mounted on. Fit slide rear clips to the rear of
wire at an angle as shown below.
3. Push slide front clip over wire until secured.
CLICK!
1
2
3
6.2
Installing the side racks
1.
Insert the rear peg into the rear access hole
provided, ensuring peg is fully inserted.
2. Then locate the front peg into the front access
hole and push in firmly.
6.3
Fitting the oven racks between the
side rack wires
The oven racks are designed so that they have
maximum extension but cannot be accidentally
pulled right out.
To fit oven racks to side racks:
1.
Locate the rear edge of the oven rack in
between guide rails of the side rack - see
diagram.
2. Ensure the same rail positions on both sides of
the oven are being engaged. With the front edge
raised, begin to slide the oven rack into the oven.
3. Once the detents have passed the front edge of
the side rack, the rack can be pushed completely
in. When fully inserted the oven racks should not
interfere with the closed oven door.
15
Publicidad
