LG U10CS1C Manual Del Propietário página 19

Operating the Air Purifier
Start/Stop
Press the Standby On/Off button to turn the air
purifier on or off.
NOTE
• When you operate the product for the first time
after installing it, it will operate in Wide Mode
with Level 5 as the fan speed.
• If you stop product operation and then resume,
it will start in the mode you last selected.
• If the product is unplugged or a power failure
occurs during operation, the most recently used
mode (fan speed, operating mode, brightness) is
saved.
• When you start product operation, the room
temperature and indoor humidity are displayed
in that order, and the overall air quality is
displayed after the sensor has stabilized.
Operating Mode
Press the Mode button to select the mode.
• If you press the Mode button during operation,
the mode will change in the order of Wide Mode
& Natural Wind Mode.
Wide Mode
Clean air comes out from the front of the product,
keeping the room cool and pleasant.
• When the Wide Mode is selected, F1 is displayed
briefly on the status display.
NOTE
• Auto Fan can be used with the Wide Mode.
Natural Wind Mode
It changes the fan speed diversely to blow air as it
can be experienced in nature.
• When the Natural Wind Mode is selected, F2 is
displayed briefly on the status display.
NOTE
• When you adjust the fan speed while operating
in Natural Wind Mode, the operating mode
changes to Wide Mode.
Adjusting the Fan Speed
Press the Speed button to control the fan speed of
the air purifier.
OPERATION 19