Ritter tondo 13 Instrucciones De Uso página 17

English
Unfold the illustrations at the front
and back of this manual.
Please read these instructions
thoroughly before using the
appliance for the first time. Keep
these operating instructions in a
safe place and ensure that they
are included with the appliance if
passing it on to a third party.
Alternatively, the current operat­
ing instructions are available at
www.ritterwerk.de.
INTENDED USE
The deli slicer is used for slicing
household foods.
The deli slicer is suitable
for contact with
foodstuffs.
If the appliance is used for any
purpose other than its intended
use, or if it is operated incorrectly,
this may result in serious injury or
damage to property. All warranty
and liability claims will be ren­
dered null and void in this case.
BEFORE USING THE
APPLIANCE FOR THE
FIRST TIME
Preparation
• Remove the appliance care­
fully from the packaging.
Info:
The deli slicer is supplied with the
slice carriage and left-over holder
pre-assembled.
• Remove all packaging parts
and keep these together with the
packaging in a safe place.
• Set the appliance down on a
flat, non-skid surface close to a
mains socket.
• Clean the appliance before
allowing it to come into contact
with any food (see CLEANING).
10
Assembling the appliance
After cleaning the slice carriage
and left­over holder, position
them as described below:
Position the slice carriage (7)
on the appliance:
• Place the two carriage
bars (14), which are located
on the underside of the slice
carriage, on the slide rail (10) of
the appliance and slide the slice
carriage forwards until it locks
into place. Make sure that the
two guide runners (12) of the
slice carriage are in the slide
guides (11) of the appliance.
• Now open the locking lever (8)
with your right hand by pushing
it forwards. You must actively
hold the locking lever in this open
position so that you can push the
slice carriage fully open with your
other hand. When you release
the locking lever, it automatically
returns to the locked position.
Info:
When correctly positioned, the
slice carriage can be moved
easily and is perpendicular to the
rotary blade.
Slide the left­over holder (6)
onto the slice carriage's handle.
• Insert the power plug (15) into
the socket.
• Always keep any excess
power cord (15) stored in the
cable compartment (16) by sliding
the cord into the slot on the back
of the appliance.
SLICING
Set the required slice thick­
ness using the infinitely adjust­
able slice thickness adjustment
knob (2). The slice thickness
adjustment scale (13) is located
on the top of the stop plate (1).
For the maximum slicing width,
turn the slice thickness adjust­
ment knob through 360° several
times.
Info:
For safety reasons, the "0" posi-
tion on the slice thickness adjust-
ment scale is designed to cover
the blade.
Place the food to be sliced
onto the slice carriage (7). Use
the left­over holder (6) to lightly
press the food up against the
stop plate (1).
Slicing with the appliance
is only possible with the slice
carriage. The slide rail is not suit­
able for placing food on. Protect
your hands by always using
the left­over holder. Exception:
Excessively large foods to be
sliced
CAUTION, risk of injury from
rotary blade:
Never use the appliance
without the slice carriage!
Turn the appliance on using
the on/off switch (3).
• With the appliance running,
gently feed the food to be sliced
up against the rotary blade (4).
Info:
Never use the appliance for more
than 10 minutes in continuous
operation.
• Switch the appliance off again
using the on/off switch when you
have finished slicing. Wait until
the rotary blade has come to a
complete stop.
• After each use, set the stop
plate (1) to the "0" position using
the slice thickness adjustment
knob (2) to cover the sharp rotary
blade and to avoid any injuries.