Descargar Imprimir esta página

Ritter tondo 13 Instrucciones De Uso página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44
CLEANING
CAUTION, risk of electric
shock, risk of injury from
exposed blade:
Switch the appliance off before
cleaning it; pull the power plug
out of the socket and set the
stop plate to the "0" position
using the slice thickness
adjustment knob (2).
Clean the deli slicer regularly to
prevent the accumulation of food
residue.
Info:
The rotary blade must also
be cleaned after each use as
described below. As all foods
contain acids, salts and moisture,
rust film can build up, even
on stainless steel. Detailed
instructions on how to care for
the rotary blade are available at
https://www.ritterwerk.com/
blade-guidance.
Preparation
• Remove the left­over
holder (6).
Release the slice carriage's
lock by pushing the locking
lever (8) forwards and holding it
in this position. Then pull the slice
carriage (7) towards you to pull
the guide runners (12) out of the
slide guides (11) of the appliance.
You can now lift the slice carriage
off the appliance.
Remove the rotary blade:
Fold open the blade
catch (5), which is integrated
in the blade cover, and turn it
clockwise (as shown by the
padlock symbol on the cover)
until the entire blade cover can
be removed.
Press against the rotary
blade (4) with one hand from the
rear to loosen it. Take hold of
the rotary blade at its rotational
centre and remove it together
with the gear wheel.
There is an additional plastic
ring under the rotary blade that
should also be removed for
cleaning.
Cleaning after each use
• Wipe down the housing, the
rotary blade as well as all other
removed parts with a damp cloth.
Occasional cleaning
• Give the rotary blade and all
other removed parts a thorough
wash in warm soapy water (not in
the dishwasher).
• Clean the housing behind the
blade using a dry cloth/brush.
Info:
Do not use any abrasive clean-
ers, sponges with rough surfaces
or hard brushes to clean the
appliance.
• Dry all parts that you have
washed.
Assembling the appliance
• Start by reinserting the plastic
ring by hooking it in at the bottom
with the blade guard until you feel
it click into place. Then press it
firmly all the way round so that it
fits snugly.
CAUTION, risk of injury from
exposed blade:
Never use the deli slicer
without the plastic ring!
• Now refit the rotary blade.
• Insert the blade catch (in the
blade cover) (5) and close it by
turning it anticlockwise (as shown
by the padlock symbol on the
cover).
Fit the slice carriage and
left­over holder.
MAINTENANCE
Your deli slicer is
maintenance­free.
However, we recommend that
you occasionally apply a little
extra ritter maintenance grease
(or optionally a little Vaseline)
to the gear wheel on the rotary
blade (4) and the guide run­
ners (12) on the slice carriage to
keep them lubricated and ensure
that the carriage continues to
move easily.
STORAGE
Keep the appliance out of the
reach of children.
Never wrap the power cord
around the appliance. To store
the power cord, always use the
cable compartment (16) inte­
grated into the appliance.
DISPOSAL OF WASTE
ELECTRICAL AND
ELECTRONIC EQUIPMENT
This symbol indicates
that this product must not
be disposed of with
unsorted municipal
waste. There is a separate (free)
system for the collection and
return of waste electrical and
electronic equipment. For more
information, please contact your
local authority or the shop where
you purchased the product. By
ensuring that this product is
disposed of correctly, you will
help prevent potential negative
consequences for the environ­
ment and human health and
contribute to the conservation of
natural resources.
REACH DIRECTIVE
See www.ritterwerk.de
English
11

Publicidad

loading

Este manual también es adecuado para:

Lupo 13