Bimar MDDP-30DEN1-QA3 Manual De Instrucciones página 13

Fax +32 030 9904733
General Information
Thank you for purchasing our Bimar dehumidifier type DEU331.EU.
The air always contains a certain amount of water in the form of vapour. This vapour determines the
degree of humidity of an environment. As the temperature increases, so does the capacity of the air to
hold water vapour. That's why as soon as the temperature decreases in homes, the air releases the
water vapour contained in it, which then settles in the form of condensation on all the cold surfaces
such as windows, walls, etc.
The dehumidifier works by removing part of the moisture from the air and prevents (e.g.
mold) caused by condensation. Experts have determined that the ideal conditions for our health and
WARNING:
This symbol invites you to read these instructions carefully before using the
appliance, and also inform other users of them, if necessary. Store this instruction
manual for future reference and for the lifespan of the appliance. Should any parts
of this manual be difficult to understand or if you have any questions, please
contact the manufacturer at the details indicated on the last page before using the
product.
This symbol highlights instructions and warnings for safe use.
This symbol indicates not to touch the device with wet hands.
This symbol indicates prohibition.
This symbol indicates that the appliance is class II.
for the home are obtained between 40% and 60% relative humidity.
GENERAL WARNINGS
T
•
his device is designed for domestic use only (not professional), solely for air treatment in
domestic environments, to dehumidify in order to reduce the percentage of relative humidity, in the
manner provided in this manual. This device is designed to be operated in the home with doors,
windows and other external openings closed, in rooms used as a kitchen, laundry room (or similar
area), bathroom, etc.... or for areas with excessive moisture, the device can also be used in the
basement to prevent moisture damage or where books or valuables are stored. The device is
designed to operate at a temperature between 5 °C and 35 °C. It should not be used for commercial
or industrial applications. The manufacturer cannot be held responsible for any damages caused by
improper, incorrect or irresponsible use and/or by repairs done by an unqualified person.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
13
Assembly page 13/61