Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
MODE OF USE
Timer off
With the unit running, press "Timer" to start the function. Then press the "Humidity Adjustment / Time
Increment" button to set the timer. The timer interval is from 1 to 24 hours and you can increase the timer
by 1 hour with each press. The unit will turn off when the timer setting has been completed. During this
setting and if no other button is pressed, press and hold the button for 5 seconds and your setting will be
maintained as long as the timer light is on.
Timer on
While the unit is connected to power but not in use, press "Timer" to start the function. Then press the
"Humidity Setting / Time Boost" key to set the duration. The unit will turn off when the timer setting is
completed. During this setting and if no other button is pressed, press and hold the button for 5 seconds
and your setting will hold while the timer light turns on and the display will show the setting times.
Automatic dehumidification mode
During this mode, if the room humidity is above the set humidity or within ±5% of the set humidity, the
compressor will start and the fan will run at the set speed.
If the room humidity is below the set humidity by -5%, the compressor will stop but the fan will run at the
set speed. The initial humidity value is 50%.
Continuous dehumidification mode
In this mode, the unit operates independently of the ambient humidity. The compressor will run and the
fan will run at high speed. The fan speed is adjustable.
Indoor drying function
Press the [Dry in dehumidifier] key for more than 2 seconds to start drying in the dehumidifier, and the
whole drying process needs about 1h:
1. The dehumidifier starts at HIGH air speed and releases air continuously for 30 minutes;
2. The dehumidifier switches to run at LOW air speed and lasts for 15 minutes;
How to stop:
Press the Mode key again for more than 2 seconds to cancel.
Press the Mode key again for more than 2 seconds to cancel drying in the dehumidifier and return to the
operating status before drying started.
Press the Mode button again for more than 2 seconds to start drying.
2. Press the [On] key to stop drying in the dehumidifier and return to the standby state. and return to the
standby state.
WIFI function
In standby mode, press the power key for at least 5 seconds to connect wifi.
Air circulation function
press the Timer button and Dry button at the same time for more than 2 seconds to start or end the Air-
swing function.
27
infiniton.es
Publicidad
