Publicidad
Idiomas disponibles
Idiomas disponibles
Cautions
• Avoid tensioning the cables, do not move the machine by dragging it from the cables, if you need to move it,
disconnect it from the outlet. Do not use the power cord to suspend the machine, move it, or pull it to disconnect it from
the electrical outlet. Keep the power cord away from heat, oils, pointed surfaces, or moving parts. A cable in poor
condition increases the risk of electric shock.
• Pay attention to the condition of the electrode holder, torch and work clamp (ground) cables, especially if they
malfunction during the welding application or when the application result is not adequate. Check the whole set:
connectors, electrode holder, torch, work clamp, repair or replace them with a quali ed electrician, PREFERENTLY take it
to an Authorized Service Center by UJUETA MÉXICO, S.A. DE C.V.
• Avoid contact with the electrical circuit, it can have negative consequences for the operator's health.
• The low DC voltage of the machine output makes it suitable for use in con ned or humid spaces. However, excessive
moisture or sweating on clothing should be avoided. Make sure there is an insulated surface where the machine can be
placed.
• Pay attention to grounding systems when welding on electrically operated equipment or systems. Improper
connections to your welding equipment can allow welding process current to ow through the grounding system.
Always connect the work clamp as close as possible to the welding area, avoid placing it in a random place.
• In the event of an accident, disconnect the machine from the electrical outlet immediately.
• Only allow quali ed personnel to repair the machine with original spare parts, this guarantees that the machine
remains in optimal operating conditions.
• Keep the machine out of the reach of rain and do not use it in humid environments.
3
YEAR
WARRANTY
Publicidad
