Publicidad
Idiomas disponibles
Idiomas disponibles
Cautions
Risk generated by welding sparks
Sparks produced by the electric arc can cause res or explosions if they come into contact with ammable or explosive
materials.
• Do not use the device in environments that present an explosion hazard or where there are ammable liquids, gases
or dust. The welders produce sparks and molten metal that can start a con agration.
• Remove all ammable substances from the job site. Fire cannot be detected while using eye protection when welding.
• Do not carry out welding processes on containers, naval artifacts or pipes that have contained ammable liquids such
as gasoline, mineral oils or gas even if they were unoccupied a long time ago since a small quantity may represent an
explosion risk.
• Do not use the machine to thaw pipes, do not weld in sealed containers.
• Always keep a charged re extinguisher and a trained person to use it close to the workplace.
Risk generated by welding fumes
Breathing the fumes, gases and particles generated by welding can cause serious problems for your health, in the short
and long term.
• Keep your head away from fumes.
• Ensure adequate ventilation, use an appropriate air extraction system.
• Make sure you have an adequate amount of fresh air at your disposal.
• Use the machine in open areas.
4
YEAR
WARRANTY
Publicidad
