Publicidad
Idiomas disponibles
Idiomas disponibles
LAURASTAR SMART APP
1
DOWNLOAD
the Laurastar App
If you have it already, make sure that the App is up to date.
2
LAUNCH
the App
Launch the Laurastar App and follow the instructions on your smartphone or tablet.
A
B
Installation and storage
Installing your ironing system
• Remove the appliance from the box and position it vertically on the ground
in a closed position.
• Hold the table with one hand on the iron rest side (6). Hold the middle
of the table (1) with the other hand and pivot it to a horizontal position
(maximum height).
• Unfold the iron-rest to the open position.
• Fit the ironing board cover (4), securing it from the side of the iron rest
to the tip of the ironing board, then adjust. The cover supplied with this
product is specially designed to ensure uniform distribution of air over the
whole board in vacuum or blower mode. Use only a Laurastar approved
cover to ensure that its effectiveness is not impaired. The cover is was-
hable at 30°C (warm water); do not spin dry.
• Take the iron (2) out of its safety storage box (5) and place it on the iron-rest (6).
• You can fold the iron-rest into the close position (6a) if you desire.
• Insert the steam hose holder (8) in one of the two holes beside the iron-
rest (6), fix the steam hose on the steam hose holder (3a). Insert the
protective soleplate hook
C
• You can lower the table height by clamping the handles (7). There are six
levels. To lift the table, simply pull it up without using the handles.
• To move your Laurastar, simply raise the tip of the board and roll.
- 7 -
A B
C
(28) in the other hole.
Publicidad
